|
So this is how I packed it:
Image 1- You see I used 4 pieces of foam to protect the frame. It's 3cm thick so I believed it also could work to keep the acrylic board away from the sticky surface (front of the canvas). The acrylic is already there, in the bottom, with a 3cm UPS (the picture is face-down in the photo) and I put it all together with some cotton strings first.
Image 2- I attached the 5cm-thick UPS plate on top and sealed everything with adhesive tape (I used some smashed paper to fill the empty spaces in the corners). Here is where I stuck a warning saying that the person who was unpacking should keep it in that position from that point onward and cut all the tapes in order to remove the picture, pulling up , carefully, and take it away from the remaining of UPS and foams.
Image 3- I used some bubble wrap, more to avoid water than any other thing (it
|
Hybrid Mode
