Portrait Artist Forum - View Single Post - Opinions on masonite and other grounds for oils

Richard Monro · 01-09-2008, 11:44 AM

Leslie,

I apply a coat of Sherwin Williams DTM Bonding Primer directly to the surface of the Dibond panel after a good sanding with a green scrubbie to scuff the surface. I then apply 3 coats of acrylic primer (sanding in between coats) and then paint on top of that surface.

01-09-2008, 11:44 AM	#7
Richard Monro Juried Member Joined: Dec 2004 Location: Scottsdale, AZ Posts: 388	Leslie, I apply a coat of Sherwin Williams DTM Bonding Primer directly to the surface of the Dibond panel after a good sanding with a green scrubbie to scuff the surface. I then apply 3 coats of acrylic primer (sanding in between coats) and then paint on top of that surface.